
Anti-takeover Protection
All or part of the programming can be locked so the
program cannot be changed if someone attempts to
takeover the account.
Automatic Arming or Delayed Arming
Program an automatic arming time for each partition
daily, override automatic arm time, or specify a time
for the panel to arm.
Cross-zoning Control
Program zones to cause an alarm only when specific
zone pairs activate to reduce false alarms. Program
cross-zoning to cause an alarm when zones activate in
sequence for detecting the direction in which an
intruder moved.
Custom Arming Configurations
Use different arming configurations to automatically
bypass a group of zones.
Easy Function-Key User Interface
• Six labeled function keys eliminate the need for multi-
button commands. Enter a PIN followed by the
function key to perform functions such as arming,
disarming, and resetting smoke detectors.
• The interface has easy to follow procedures. The
interface does not use cumbersome menu driven
formats, so expert users can quickly access the items
they need.
• A programmable Quick Arm feature allows users to
turn the system on without a PIN; however, a PIN is
needed to turn off the system, silence alarms, or
perform system tests. Residential Mode requires a
PIN to disarm the system, silence alarms, and reset
the system.
Program Memory
The control panel retains all program memory and the
arm-disarm state during a power failure. When power
restores, alarms are delayed to prevent false alarms
from detectors that can take several minutes to
become operational. None of the system programming
or user codes are lost.
Flexible Digital Communication
The communicator works with most alarm receivers
used today. It supports 3/1, 4/1, 4/2, SIA, Contact ID,
High Speed 4/9, BFSK digital communicator formats,
and a pager format. The pager format allows the
control panel to dial a digital pager service and leave a
numeric message representing the account number
and event code.
Keypad Support
• The DS7443S LED Keypad has one LED per zone
(LEDs 1 to 6 for main board zones) and four system
status LEDs that indicate conditions such as armed,
fire alarm, and trouble.
• The DS7445i or DS7445V2 Light-emitting Diode (LED)
Keypads have one LED per zone (LEDs 1 to 8 for main
board zones and LEDs 9 to 16 for expansion zones)
and eight system status LEDs that indicate conditions
such as armed, fire alarm, and trouble.
• The DS7447E or DS7447V2 Alphanumeric Keypads
have two lines of custom-programmable display. You
can program 16 characters of custom text for zone
and partition descriptions. The user can adjust the
sounder volume and backlight intensity using easy
two-button commands. The DS7447E or DS7447V2
Keypad is required for system programming.
Notice
LED and LCD keypads can be mixed in the same
system. Up to four keypads can be used, but no
more than two keypads on any 300 m run.
Optional Eight-relay Output Module
The DS7488 module has eight Form C relays with fixed
functions such as alarm output, system ready, and
panic.
Optional Solid-state Output Module
The DS7489 module has eight current-sink outputs,
with fixed functions, to operate devices such as LEDs
and sounders. Total current sink is 750 mA for all eight
outputs.
Smoke Detector Alarm Verification
Program the DS7080iP-32 Control Panels to perform
an automatic reset on the smoke detectors if an alarm
occurs. If a second alarm occurs within the verification
window, an immediate fire alarm results. Fast
response to a fire is maintained while potential false
alarms are reduced.
Three Telephone Numbers
The system supports two 20-digit telephone numbers
with a three- or four-digit account code. Configure
each of the two phone number's communication
format and choice of pulse or tone dialing. The third
phone number is reserved for remote programming.
Two Independent Entry Delays
Program zones to select one of two entry delay times.
You can select a longer entry delay time for zones that
are located a long distance from the keypad.
Certifications and approvals
USA FCC
Region Certification
Europe CE 1999/5/EC Radio Equipment and Tele-
communications Equipment
(R&TTE), 2004/108/EC EMC Di-
rective (EMC), 2006/95/EC Low-Volt-
age Directive (LVD)
Belgium INCERT B-509-0003/c
USA UL AMCX: Central Station Alarm Units
(UL1610, UL1635), AOTX: Local Alarm
Units (UL464, UL609), APAW: Police
Station Alarm Units (UL365, UL464),
APOU: Proprietary Alarm Units
(UL1076), NBSX: Household Burglar
Alarm System Units (UL1023)
2 | DS7080iP32 Eight-zone Control Panels
Komentáře k této Příručce